Combobox width=30 chars extends to ~320-380px depending on font metrics,
colliding with Add at x+290 and Delete at x+350. Narrowed combobox to
width=22 and shifted buttons to x+260 and x+320 to give clear separation.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Port-forward setup was failing the installation because:
1. argocd and dashboard entries were always added to port-mapping even when
those services haven't been selected or installed yet
2. Grafana/Prometheus service names were hardcoded as kps-* but monitoring
deploys with release name "prometheus" → services are prometheus-grafana etc.
3. The grafana status poll after init_port_forwards.sh start would mark the
entire installation failed if grafana wasn't reachable
Changes:
- _build_required_port_forwards (env.py): add argocd_enabled, dashboard_enabled,
monitoring_release params; argocd/dashboard only included when enabled; grafana
and prometheus targets use f"svc/{monitoring_release}-grafana" etc.
- _sync_port_forward_mappings (actions.py): read argocd_enabled from installer
config; read MONITORING_RELEASE from Monitoring section; clean up argocd and
dashboard entries from [Port Forwards] when disabled
- run_init_scripts (services.py): port-forward step is non-fatal — failure logs
a warning and continues; blocking grafana poll removed
- 2 new regression tests (7e) covering the above invariants
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
services.py run_init_scripts() called init_kong.sh with -n env[NAMESPACE]
where NAMESPACE is the database namespace (e.g. knoe-db). The -n flag
sets COMMON_CORE_NAMESPACE which wins over SERVICE_NAMESPACE in
common_core_resolve_namespace, so Kong deployed into knoe-db.
Fix: resolve kong_ns from SERVICE_NAMESPACE, falling back to
_get_service_namespace() and finally knoe-system. Exclude default
as it is the Tk StringVar initial value, not a real service namespace.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Junie's session targeted the prompt "stabilize ./install.py -c conf/k3d.cfg
using strict TDD" — broad installer-side work, not the k3d-mirror Phase 3
brief I had filed (which she didn't pick up; phase-3 brief stays open). All
750 installer tests pass post-change.
What Junie produced:
install.py (NEW) Top-level CLI entry point. Was
imagined by the prompt but didn't
exist; this commit makes it real.
knoe/deployment.py (NEW) `KnoeDeployment` orchestrator for
the k3s service-mode deploy pipeline.
Wraps Ansible kubeconfig fetch,
opentofu apply, init_*.sh post-apply
scripts, and (optionally) supabase/
deploy.sh.
knoe/ui/screens/cluster.py Dual-cluster GKE kubecontext UI: prod env
knoe/ui/screens/cfg.py now shows separate "App Cluster:" and
"DB Cluster:" dropdowns instead of a
single "Kubernetes Context:" combo.
New _app_kubectx_combo + _db_kubectx_combo
widgets; new app/db_cluster_kubecontext
tk.StringVars.
knoe/core/{actions,env,milestones}.py
knoe/core/ops/storage.py
knoe/config.py, knoe/knoe_conf.py Plumbing changes for the dual-cluster
kubecontext flow + storage-class topology
detection cleanup.
knoe/tools/cleanup_cnpg_storage.py (NEW) Stand-alone cleanup utility.
tools/dashboard.sh (NEW) Dashboard helper.
conf/knoe.cfg (NEW) Master cfg generated by knoe_conf.
conf/dev/ (NEW) Dev-mode cfg directory.
conf/port-mapping.cfg Port mapping tweaks for k3d.
tests/installer/* (8 files) New + extended tests for the dual-cluster
tests/test_database_options.py TUI, kubecontext save flow, storage ops,
topology detection, deploy helpers,
database-options screen.
Issues found in Junie's working state and fixed here:
1. install.py was a 11-line import shim with no shebang, no `chmod +x`,
no `if __name__ == '__main__'` block. `./install.py -c conf/k3d.cfg`
returned `Permission denied` and `python install.py` did nothing.
Added `#!/usr/bin/env python3`, `chmod +x`, and a __main__ block
that delegates to `knoe.ui.screens.main()`. `./install.py --help`
now prints the canonical argparse help.
2. knoe/deployment.py had FIVE `subprocess.run()` call sites with no
`timeout=` argument (`_run_script`, `_run_cmd`, the Ansible playbook
fetch, `tofu init`, `tofu apply`). A hung child process — typical
failure mode is a script waiting on stdin or a stalled network
call — would lock up the installer indefinitely. Added timeouts:
- Ansible kubeconfig fetch: 120s
- tofu init: 300s
- tofu apply, _run_script, _run_cmd: bounded by new module
constant `_MILESTONE_TIMEOUT` (default 1800s = 30 min, override
via `KNOE_MILESTONE_TIMEOUT_SECONDS` env var).
`subprocess.TimeoutExpired` is caught explicitly; on timeout the
run helpers return exit code 124 (conventional timeout code).
3. `conf/k3d.cfg` was corrupted with MagicMock string-reprs on disk:
KNOE_CONF = <MagicMock name='Canvas().tk.call().strip()' id='4743999712'>
argocd.node_selector = <MagicMock name='mock.StringVar().get().strip()' id='...'>
Likely path: Junie ran `./install.py -c conf/k3d.cfg` interactively
in a non-Tk environment (or with a partially-mocked widget set) and
the installer's "save current state" path wrote the mock-objects'
`__repr__` strings into the cfg file. This commit reverts the cfg
to its pre-Junie state. **Followup: harden the cfg save path
against non-string widget values** — track separately.
4. The corrupted cfg caused the installer to call `os.makedirs()` on
the mock-string values, producing 10 directories on disk literally
named `<MagicMock name='Canvas().tk.call().strip()' id='4733210304'>/`
etc., with 5–86 files of install artifacts inside each. Removed.
The "final step is timing out" the user reported was almost certainly
issue #2 above: install.py walked the milestone pipeline, hit one of
the unbounded subprocess.run calls, and the wrapped command (probably
supabase/deploy.sh, which Junie was reading for context when her
session timed out) hung. With the timeouts in place that path now
exits cleanly with rc=124 instead of locking up.
Verification:
- pytest tests/installer/ -q 750 passed in ~25s
- python3 -c "import knoe.deployment" imports clean
- ./install.py --help prints argparse help
- find . -maxdepth 1 -type d -name '<MagicMock*' | wc -l 0
- head -7 conf/k3d.cfg clean (no MagicMock)
Out of scope for this commit (followups):
- The cfg save-path that wrote mock-objects-as-strings (issue #3 root cause).
Reproducer: launch the installer in an env where Tk widget vars are
`unittest.mock.MagicMock` instances. The cfg save code should refuse to
serialize non-str values rather than calling `str()` on a MagicMock.
- The k3d-mirror Phase 3 brief (`docs/plans/junie/k3d-knoe-auth-pod-deploy.md`)
is still open — Junie picked a different prompt this round.
Co-authored-by: Junie <junie@jetbrains.com>
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Bringing the long-running session-feature branch back into main in one
deliberate sweep. The branch carried the cluster work that's been live for
weeks (cross-cluster CNPG metrics, Grafana w/ Google OAuth, supabase
oauth2-proxy, cluster recovery, pg.0.knoe.dev + per-engineer onboarding,
GCS-backed CNPG backups via Workload Identity, the env-contamination
guard, the Junie brief queue, the cnpg-grafana CSRF + memory-request
fixes from today), while main accumulated Junie's parallel knoe-auth
Phase 2 OIDC work (full provider surface: discovery, authorize, token,
userinfo, JWKS, RS256 signing, code exchange, session services).
Key decision: the two branches did COMPETING rebrands off the same
starting point (5ba9b63, 2026-04-27):
- claude branch (commit b355855, earlier): org.prole.authority.* →
dev.knoe.auth.*
(artifact renamed to
knoe-auth.jar)
- main (commit 9daa94b, recent): org.prole.authority.* →
dev.knoe.authority.*
(kept "authority" artifact name)
dev.knoe.auth wins: cluster runs from this name, the Maven artifact is
already knoe-auth.jar, and the broader rename is the documented
namespace direction (per ~/.claude/projects/-Users-chrisfu-dev-knoe-db/
memory/MEMORY.md). All of main's recent Phase 2 OIDC content was ported
from authority/src/.../dev/knoe/authority/ into
authority/src/.../dev/knoe/auth/ with package declarations rewritten.
== File-level resolution summary ==
Textual conflicts (4):
authority/pom.xml
- Took our artifactId="auth"
- Took our branch's removal of spring-security-kerberos-client
(verified: Junie's Phase 2 OIDC code does not import it; the dep
was already-dead config)
docs/pipeline-phases.md
- Took our branch's "Phase 1 not started" status. Main had a
misplaced "✅ Complete" with a knoe-auth-Phase-1 commit ref
in the autobuild Phase 1 section — different domain.
docs/plans/knoe-auth-round-1.md
- Took our branch's dev.knoe.auth file table (vs main's
dev.knoe.authority listing). Pure rename mismatch.
supabase/helm/knoe-supabase/templates/kong/config.yaml
- Took our branch's onboard route + plain dashboard wiring.
Main had an oauth2proxy.enabled toggle that put oauth2-proxy as
a Kong upstream — but the deployed architecture (commit 25f1b2e)
has oauth2-proxy in FRONT of Kong, not behind. Main's wrapper
reflected an architecture that was never deployed.
- Took our branch's removal of basic-auth from dashboard route
(queue #15 brief still tracks the matching values.yaml /
kong/deployment.yaml cleanup).
Java tree reconciliation (44 file-pairs):
20 dual-path source files + 2 dual-path tests
Body-identical between main's authority/ and our branch's auth/
after stripping package decls — main's commit 9daa94b was a pure
rebrand. Took our branch's auth/ version for all 22.
8 main-only source files (Phase 2 OIDC), ported into auth/:
web/JwksController.java
web/OidcAuthorizeController.java
web/OidcDiscoveryController.java
web/OidcTokenController.java
web/OidcUserInfoController.java
session/OidcCodeService.java
session/OidcTokenService.java
session/SessionService.java
12 main-only test files, ported into auth/:
HealthControllerTest.java
enroll/EnrollValueTypesTest.java
enroll/EnrollmentControllerTest.java
enroll/TotpServiceTest.java
kerberos/KadminClientTest.java
kerberos/KerberosSpnegoResultTest.java
web/LoginControllerTest.java
admin/AdminControllerTest.java
user/PrincipalNormalizerTest.java
regression/IdentityRegressionTest.java
session/OidcCodeServiceTest.java
session/SessionServiceTest.java
Port mechanics: read main:authority/...<file> via git show, then sed
rewrite `package dev.knoe.authority` → `package dev.knoe.auth` and
`import dev.knoe.authority` → `import dev.knoe.auth`. Body content
unchanged.
authority/src/main/java/dev/knoe/authority/ — DELETED (duplicate)
authority/src/test/java/dev/knoe/authority/ — DELETED (duplicate)
== Verification ==
- grep -rln '<<<<<<<' across .java/.md/.yaml/.yml/.sh/.xml/.tpl: clean
- find authority/src -path '*/dev/knoe/authority*': empty (subtree gone)
- grep 'package dev.knoe.authority' across repo: clean
- bash -n install.sh deploy.sh etc/preflight_kubecontext.sh: clean
- git ls-files -u | wc -l: 0 unmerged paths
- helm lint supabase/helm/knoe-supabase: pre-existing failure on
studioIngress.enabled undefined in values.yaml (introduced by Junie
on main; unrelated to this merge — flagging as follow-up).
== Followups (carried into TODO ranked queue or noted here) ==
- helm lint failure: studioIngress block in values.yaml is missing
enable flag; templates/studio/{ingress,oauth2proxy-deployment,
oauth2proxy-service}.yaml all reference studioIngress.enabled with
no default. Pre-existing on main; not introduced by this merge.
- The five Junie briefs filed on this branch are now reachable from
main at docs/plans/junie/{02,06,07,13,15}-*.md. Junie can pick them
up in any order.
- knoe-auth Phase 2 OIDC source (now at dev.knoe.auth.*) is not yet
deployed to the cluster. Deployment is its own task.
- The branch claude/crazy-bose-fec256 stays in place (worktree at
.claude/worktrees/crazy-bose-fec256 may have ongoing context for
Claude Code sessions). Safe to delete once next session starts
cleanly from main.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- remove hardcoded physical host assumptions in UI/init flows and rely on config-driven selectors\n- optimize GitLab reruns to skip unnecessary operator upgrades/long reconcile waits when unchanged\n- add and update regression/shell tests for fast-path and k8s context/ingress/garage behaviors
Co-authored-by: Junie <junie@jetbrains.com>
Rename env config files from conf/*/prole.cfg to conf/k3d.cfg, conf/k3s.cfg, and conf/gke.cfg. Update shell/Python loaders and etc/deploy scripts to resolve named configs cleanly while keeping legacy fallback behavior. Align k3s Ansible tasks, docs, and regression coverage with the new configuration layout.
Co-authored-by: Junie <junie@jetbrains.com>
- fix conf/prod/prole.cfg by replacing hardcoded /Users/chrisfu paths with /Users/chrisfu
- remove injected [update.sh] log lines and stray password artifacts so config is executable
- include latest pending updates across deployment config, UI/core flow, vault/network artifacts, and helper scripts
- separate default app and db cluster contexts (knoe-dev-0 and knoe-cnpg-0) across actions, ops flows, and installer config\n- update CNPG placement and GKE manifests to keep PostgreSQL on the db cluster while app services stay on the app cluster\n- add GCS-backed Barman ObjectStore manifest and cross-cluster Garage patch workflow\n- refresh UI cluster/database/service screens and monitoring wiring for dual-cluster operation\n- add reset/patch scripts, db context selection test coverage, and architecture/network documentation updates
Co-authored-by: Junie <junie@jetbrains.com>
- harden CNPG backup ObjectStore readiness fallback in statusless clusters by validating controller availability and expected spec
- improve backup/plugin reconciliation paths and related test coverage for barman-cloud flows
- include ongoing GKE/CNPG deployment and configuration updates from this checkpoint
Co-authored-by: Junie <junie@jetbrains.com>
UI screens
- database.py: fix mode detection to use env_key priority (prod→k8s, service→k3s) so stale DEPLOYMENT_MODE never overrides the user's chosen environment
- database.py: Registry status reads ARTIFACT_REGISTRY_AVAILABLE persisted by cluster screen; uses SERVICE_NAMESPACE for Artifact Registry repo name
- cluster.py: add Artifact Registry traffic light (amber→green/red) to prod section; _check_artifact_registry_async persists ARTIFACT_REGISTRY_AVAILABLE into Global cfg
- cluster.py: re-trigger Artifact Registry check after GKE cluster selection so the light re-evaluates once region is available from KUBECONTEXT
- cluster_nodes.py: fix TclError on Python 3.14 — pady=(2,0) tuple → pady=2 scalar
- __init__.py: seed knoe-system namespace when saved value is "default", not only when empty
- services.py: replace hardcoded "Prole DB" log string with dynamic cnpg_cluster name
Core ops
- cloudnative_pg.py: replace one-shot Barman plugin retry with 6-attempt loop; first cert-manager/x509 failure triggers rollout restart + 30 s CA propagation wait; subsequent failures back off up to 60 s per attempt
- cloudnative_pg.py: TLS CA CN now uses cluster_name instead of hardcoded "Prole CNPG CA"
- registry.py, garage_store.py: refactored into per-mode modules (k3d/k3s/k8s registry and garage store, shared _garage_common)
Deploy / config
- deploy/gcp/gke/knoe-db.yaml: GKE-specific CNPG cluster manifest (rw/ro/r on separate nodes with premium-rwo storage)
- etc/init_common_services.sh, modes/k8s/knoe-db/.version: updated for current deploy
- kong-deployment.yaml: updated manifest
Tests
- test_cluster_nodes_render_smoke.py: add pack/grid, winfo_children, winfo_reqheight, update_idletasks, grid_slaves to dummy widgets; monkeypatch tk.Label so CNPG placement render completes without a real Tkinter root
Co-authored-by: Junie <junie@jetbrains.com>
## GCP / Cluster Environment Screen
- Auto-populate Cloud tab from conf/prod/gcp.cfg on screen open (org_id,
billing_account, billing_project, project_id)
- gcloud auth validity checked on screen startup; friendly modal dialog
streams gcloud auth login output live so user never leaves the app
- Live GKE cluster browser: fetches clusters via gcloud container clusters
list, displays with checkmark selector, auto-selects saved cluster
- Selecting a cluster runs get-credentials, sets KUBECONFIG/KUBECONTEXT,
and syncs the region dropdown to the selected cluster's location
- Region dropdown populated live from gcloud compute regions list with
checkmark on currently selected region; graceful fallback when offline
- New 'GCP Storage' tab with workload->StorageClass mapping (CNPG->premium-rwo,
Redis/Monitoring->standard-rwo, Garage->garage-hdd) and Fetch from Cluster
- Provider readonly field styled correctly (no solid-black on macOS)
- Stale prole.cfg/conf/prole.cfg symlinks removed; all config I/O now
resolves env-specific paths via prole_conf.entrypoint_path()
## GKE Autopilot Compatibility (Common Services)
- Synology iSCSI StorageClass and static PVs guarded behind PROLE_MODE!=k8s
in init_openbao.sh (GKE Autopilot forbids hostPath/iSCSI volumes)
- In-cluster Docker registry (hostPath) skipped in k8s mode; GCP Artifact
Registry used instead
- Kong renamed knoe-svc-kong in k8s mode; all health-check kubectl calls in
init_common_services.sh and status_common_services.sh updated accordingly
- DNS endpoints switched from *.prole.org to *.knoe.dev in k8s mode
(api.knoe.dev, git.knoe.dev, svc.knoe.dev); ingress uses gce class
- New GKE-clean Kong manifests under deploy/opentofu/k8s/manifests/prole/:
no k3s node affinity, explicit Autopilot resource requests/limits
## Garage S3 Store (GKE)
- New garage-statefulset-gcp.yaml targeting garage-hdd StorageClass
(pd-standard, avoids SSD_TOTAL_GB quota exhaustion in us-west3)
- New storageclass-gcp-hdd.yaml (pd-standard, Retain, WaitForFirstConsumer)
- GCP StorageClass manifests skipped on re-runs (Autopilot built-ins are
immutable; skip-if-exists guard added)
- PVC deletion guard extended to cover any storageClass (not just synology)
so stale claims are cleaned before StatefulSet recreation
## Topology (GKE Autopilot)
- DaemonSet collector skipped in prod mode (forbidden in kube-system by
GKE Warden); Kubernetes-only node facts path used instead
- All ready GKE nodes assumed cnpg-eligible and monitoring-eligible without
taint/synology-mount checks (skip_collector + assume_nodes_eligible flags)
## KUBECONFIG / kubectl (k8s mode)
- actions.py: new elif mode==k8s branch sets KUBECONFIG=~/.kube/config
and injects KUBECONTEXT from prole_cfg_data into script env
- _build_kubectl_cmd falls back to Global.KUBECONTEXT when
init_cluster.selected_kubectx is empty
- _activate_selected_gke_cluster persists KUBECONFIG/KUBECONTEXT to
prole_cfg_data and saves prole.cfg immediately after get-credentials
## Database Build Screen (GKE)
- Registry display shows correct Artifact Registry URL
(<region>-docker.pkg.dev/<project>/<namespace>/knoe-db) in green
- Build+push: gcloud auth configure-docker, auto-creates AR repository
named after SERVICE_NAMESPACE (e.g. knoe-system) if missing, then
docker tag + push; falls back to gcr.io if region unavailable
- GCP config loaded from conf/prod/gcp.cfg on every screen entry;
keys normalised to lowercase so project_id lookup is always consistent
## Config / Namespace persistence
- prole_conf.py activate_environment: symlink creation removed; sets
CLUSTER_ENV env-var so all subsequent calls resolve correct env directory
- knoe/ui/screens/__init__.py: startup config load uses entrypoint_path()
instead of hardcoded conf/prole.cfg; seeds SERVICE_NAMESPACE=knoe-system
for managed envs so Common Services never defaults to 'default'
- cfg.py _save_prole_cfg: saves to env-specific path via entrypoint_path()
- etc/prole_cfg.sh: removed all ln -snf symlink creation
Co-authored-by: Junie <junie@jetbrains.com>
New KnoeUsersScreenMixin screen (knoe_users) appears in the install wizard
immediately after Kerberos Authentication (when kerberos is enabled).
- Runs etc/init_knoe_users.sh initialize in a background thread with live
console output, forwarding SERVICE_NAMESPACE/KNOE_KDC_NAMESPACE from the
installer state so the script always targets the right namespace
- Optional Gitea and GitLab admin token fields for service admin promotion
- Next button is disabled until provisioning succeeds (idempotent: button
re-enables on failure so the user can fix and retry)
- Nav chain: kerberos_config -> knoe_users -> argocd_config
Prev from argocd_config respects kerberos_enabled to route correctly
- Records STATUS in prole.cfg under [Knoe User Accounts] section
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- update Kong/Supabase ingress and service manifests for k3s
- expand init scripts and runtime config/topology handling
- refresh KNØE UI screens and Supabase deployment/render logic
- include related env helper test adjustments
Co-authored-by: Junie <junie@jetbrains.com>
- add tools/manage-node.sh for k3s node add/remove automation with inventory reconciliation
- include kubectl drain flag compatibility and --ssh-host targeting for uninstall workflows
- persist installer cfg/env values and update deploy/database/cfg UI handling
- refresh related inventory/network artifacts and expand installer/database test coverage
Co-authored-by: Junie <junie@jetbrains.com>
- Introduced `knoe.core.prod_config` with production configuration schema and helper methods.
- Added validation logic to enforce required fields and expected formats.
- Implemented in-process API (`ProdConfigApi`) for managing production configs.
- Added test coverage for default config behavior, validation, YAML generation, and API workflow.
- Updated cluster UI layout and tests to integrate production config with new navigation flows.
- Added host inventory and updated service flow to reflect production setup changes.
- add reusable storage probing subsystem with discovery, bounded probe execution, IO classification, caching, and topology integration
- render per-node storage inventory in Cluster Nodes UI and extend installer test coverage for topology/storage behavior
- introduce core service operation modules and align actions, milestones, services, and supporting configs/scripts for repair/update workflows
- update CNPG/Supabase/database artifacts, placement and port mapping configs, plus related integration tests
Co-authored-by: Junie <junie@jetbrains.com>
STABLE BUILD — all 35+ pods Running, zero non-Running pods, CNPG ready=3.
## Architecture changes (Supabase slim-down)
- Removed local Supabase Kong, Storage, MinIO, Imgproxy from deployed stack
- Rewired API routing to shared Kong in kube-system
- Rewired object storage to shared Garage in knoe-system
- Supabase footprint reduced to control-plane only: auth, rest, meta,
analytics, realtime (studio port-forward retained)
- Supabase pods renamed: stripped redundant '-prole-supabase-' prefix via
per-component fullnameOverride (e.g. supabase-auth, supabase-rest, ...)
- Supabase workloads pinned to merlin.prole.org (memory-safe node)
## File changes
- conf/service/prole.cfg
* Replaced all hardcoded /Users/chrisfu/dev/prole paths with ${HOME}/dev/prole
so config is portable when run from myrddin.prole.org or any user home
* SUPABASE_ENABLED=True, SUPABASE_PRIMARY_NODE=merlin.prole.org in
both [Global] and [Optional Features]
* supabase_enabled=true in [Inputs]/init_cluster section
- supabase/helm/render_supabase.py
* Explicitly disabled: kong, storage, minio, imgproxy
* Active components pinned via nodeSelector to merlin.prole.org
* fullnameOverride per component to clean up pod names
* Default primary node changed from pi.prole.org -> merlin.prole.org
- supabase/deploy.sh
* Removed svc/kong port-forward; API via shared Kong in kube-system
* Removed imgproxy/storage from PV/PVC prep and helm --set persistence args
* Fixed kubectl exec missing -i flag for psql heredoc stdin in
setup_knoe_db_for_supabase
* Updated Studio access messaging to reference shared platform Kong
- k8s/prole/knoe-db.yaml
* instances: 3
* Added control-plane/master tolerations for myrddin scheduling
- deploy/opentofu/k3s/manifests/prole/knoe-db.yaml
* instances: 3, added control-plane tolerations (mirrors k8s/prole/)
- k8s/prole/iscsi-pvs.yaml
* Expanded d003-data/d003-wal nodeAffinity to [pi, merlin, myrddin]
to reflect post-OOM-recovery live state
- k8s/registry/deployment.yaml
* nodeSelector restored to myrddin.prole.org (hostPort 5000 owner)
* Added control-plane + master tolerations so pod schedules correctly
- modes/k3s/knoe-db/.version
* Aligned to 140 (image tag 18-140) matching repo-root version
- etc/init_common_services.sh, etc/init_registry.sh
* Minor fixes aligned with slimmed service layout and node targeting
- infrastructure/inventory/host_vars/pi.prole.org.yml
* Updated host vars to reflect post-recovery pi state
- knoe/core/topology.py, knoe/ui/screens/cluster.py,
knoe/ui/screens/cluster_nodes.py
* Topology and UI updates for 3-node cluster representation
- scan/network_description.txt
* Refreshed network scan output post-recovery
- conf/port-mapping.cfg
* Updated port mapping to reflect removal of local Kong/storage forwards
- scripts/cleanup_stale_rs.sh (new)
* Utility script to prune orphaned ReplicaSets after rollouts
## Verified stable state
- CNPG: Cluster in healthy state, ready=3
knoe-db-2 (merlin, primary), knoe-db-3 (pi), knoe-db-5 (myrddin)
- Supabase: 5 pods Running on merlin.prole.org
supabase-auth, supabase-rest, supabase-meta,
supabase-analytics, supabase-realtime
- Monitoring: all prometheus/grafana/alertmanager pods Running on merlin
- Registry: Running on myrddin.prole.org (hostPort 5000)
- Zero non-Running / non-Completed pods across all namespaces
Co-authored-by: Junie <junie@jetbrains.com>
All active runtime paths that previously shelled out to etc/init_cloudnative_pg.sh
now dispatch through Python. The shell script has been removed from git.
New files:
- knoe/core/ops/cloudnative_pg.py: canonical Python owner for CNPG lifecycle with
public API (initialize, deploy, rollout, ensure_operator, pin_controller,
install_barman_plugin) and internal helpers (_apply_manifest, _wait_cnpg_pods,
_reconcile_instances, etc.)
- prole/tools/run_cnpg_coverage.py: coverage entry points for k3d/k3s modes,
report sub-command, and check-shell scanner to confirm no live Python dispatch
to the removed shell script
Modified files:
- knoe/core/actions.py: replace shell dispatch in _step_init_scripts,
_step_cnpg_deploy, and repair pipeline with Python calls
- knoe/core/milestones.py: replace shell dispatch in InitializationScriptsMilestone
and DeploymentMilestone
- knoe/ui/screens/services.py: replace shell dispatch for init-scripts step,
deploy button, and rollout button
- prole/deployment.py: replace shell dispatch in _run_post_apply_scripts
- status.py: remove init_cloudnative_pg.sh from _STATUS_SCRIPTS list
- tests/installer/test_actions_helpers.py: mock Python functions, assert shell
script is never dispatched
- tests/installer/test_milestones.py: same
- tests/installer/test_services_init_scripts.py: same
Removed:
- etc/init_cloudnative_pg.sh (git rm)
Verification:
- prole.tools.run_cnpg_coverage check-shell reports clean
- All 61 tests in the affected test files pass
Co-authored-by: Junie <junie@jetbrains.com>
- Replace ambiguous NAMESPACE handling with SERVICE_NAMESPACE, DATABASE_NAMESPACE, and CLUSTER_NAME across config parsing/defaults, environment setup, actions, and UI bindings.
- Persist DATABASE_NAMESPACE and CLUSTER_NAME from Database Browser on Next and use them consistently in CNPG deployment/runtime logic.
- Update milestones/tests and include related config/tooling artifacts (cleanup_cnpg_storage tool, service config/version/network updates).
Co-authored-by: Junie <junie@jetbrains.com>
- detect local k3s node kubeconfig and skip kubectx/use-context mutation when already targeting local API\n- add configurable KUBE_CONTEXT_NAME resolution with compatibility fallbacks and switch only when required\n- update init scripts to use ensure_kube_context helper naming\n- broaden monitoring eligibility to discovered /synology/d### mounts so /synology/d004 qualifies\n- add focused kube-context and topology tests covering local/remote and read-only kubeconfig cases
Co-authored-by: Junie <junie@jetbrains.com>
- Rename iSCSI storage class and PV/PVC selectors/labels from prole to synology across k8s and OpenTofu manifests\n- Update CNPG/OpenBao/Garage/monitoring init flows, render helpers, and mock scripts for synology-backed storage objects\n- Integrate related UI/core/service config/version updates and add supporting regression tests for CNPG storage/image behavior\n- Keep storage reconciliation tests aligned with current CNPG affinity output
Co-authored-by: Junie <junie@jetbrains.com>
- Introduce mode-scoped directories under `~/.prole` for build contexts, runtime data, and versioning.
- Update DB image version generation and Dockerfile creation to respect deployment modes (e.g., k3d, k3s, k8s).
- Adjust UI, core actions, and scripts to avoid cross-mode conflicts and ensure correct version isolation.
- Add tests for mode-aware behaviors and update existing tests for new paths and markers.
- Bump PostgreSQL and image versions to `18` and `138`, respectively.
- Update Kubernetes manifests to align with new image and version configuration.
- Implement centralized `resolve_prole_home` utility for consistent environment-based `PROLE_HOME` resolution across modules
- Replace hardcoded home paths with `resolve_prole_home`
- Refactor PV management to support iSCSI mounts and node placement from Ansible manifests
- Improve Kubernetes manifest handling to dynamically apply namespaces per document
- Adjust `knoe-db` build context path and related tests
- Add utilities for detecting and applying Ansible-defined node labels and PVs
