prole/CLAUDE.md

# CLAUDE.md — prole project context

> Loaded automatically by Claude Code (CLI and IntelliJ plugin) as project context.

---

## Dual-cluster GKE architecture

This project uses **two separate GKE Standard clusters** in `us-west3`, both e2-small × 3 nodes:

| Cluster | Context | Role |
|---|---|---|
| `knoe-dev-0` | `gke_plenary-truck-485623-p7_us-west3_knoe-dev-0` | App cluster — Garage, registry, OpenBao, Kong, GitLab, monitoring |
| `knoe-cnpg-0` | `gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0` | DB cluster — CNPG/PostgreSQL only |

### Resource allocation

| Resource | Cluster | Namespace |
|---|---|---|
| CNPG operator | `knoe-cnpg-0` | `cnpg-system` |
| PostgreSQL cluster (`knoe-db`) | `knoe-cnpg-0` | `knoe-db-0` |
| Barman Cloud plugin | `knoe-cnpg-0` | `cnpg-system` |
| cert-manager | `knoe-cnpg-0` | `cert-manager` |
| Garage (S3 object store) | `knoe-dev-0` | `knoe-system` |
| Registry | `knoe-dev-0` | `knoe-system` |
| OpenBao | `knoe-dev-0` | `knoe-system` |
| Kong API gateway | `knoe-dev-0` | `knoe-system` |
| Monitoring | `knoe-dev-0` | `monitoring` |

**Garage runs ONLY in `knoe-dev-0`.** Do NOT deploy Garage to `knoe-cnpg-0`.

### CNPG backups → GCS (not Garage)

Backups use **GCS with Workload Identity** (not Garage):
- Data bucket: `gs://knoe-0-backups/`
- WAL bucket: `gs://knoe-0-wal/`
- GCP SA: `cnpg-backup@plenary-truck-485623-p7.iam.gserviceaccount.com`
- K8s SA: `cnpg-backup-sa` in `knoe-db-0` (annotated with WI)
- ObjectStore manifest: `k8s/prole/knoe-db-barman-objectstore-gcs.yaml`

Setup script: `etc/init_cnpg_gke.sh` (creates buckets, GCP SA, WI binding, applies CNPG cluster).

---

## Service mesh (Cloud Service Mesh / Istio)

Both clusters are registered in the **knoe-0** GCP fleet with automatic Cloud Service Mesh management. This is automated in `scripts/reset_clusters.sh` (Phase 7) — no longer requires GCP web console.

```bash
# Check mesh provisioning status (~10 min after cluster creation):
gcloud container fleet mesh describe --project=plenary-truck-485623-p7

# Manual re-registration if needed:
gcloud container fleet memberships register knoe-dev-0 \
  --gke-cluster=us-west3/knoe-dev-0 \
  --enable-workload-identity \
  --project=plenary-truck-485623-p7
gcloud container fleet mesh update \
  --management=automatic \
  --memberships=knoe-dev-0 \
  --project=plenary-truck-485623-p7
```

---

## install.sh / deploy.sh pre-flight checklist

### `conf/prod/prole.cfg` (interactive installer — `./install.sh`)

Before running `./install.sh` (especially "Initialization Scripts"), confirm these are correct:

```ini
[Inputs]
init_cluster.app_cluster_kubecontext = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
init_cluster.db_cluster_kubecontext  = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0
env_setup.APP_CLUSTER_KUBECONTEXT    = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
env_setup.DB_CLUSTER_KUBECONTEXT     = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0

[Global]
KUBECONTEXT = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
APP_CLUSTER_KUBECONTEXT = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
DB_CLUSTER_KUBECONTEXT  = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0
CNPG_ELIGIBLE_NODES = <comma-separated node names from knoe-cnpg-0>
```

### `conf/service/prod.cfg` (unattended deploy — `./deploy.sh`)

Same cluster context entries are required here too:

```ini
[Inputs]
init_cluster.app_cluster_kubecontext = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
init_cluster.db_cluster_kubecontext  = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0
env_setup.APP_CLUSTER_KUBECONTEXT    = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
env_setup.DB_CLUSTER_KUBECONTEXT     = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0

[Global]
KUBECONTEXT = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
APP_CLUSTER_KUBECONTEXT = gke_plenary-truck-485623-p7_us-west3_knoe-dev-0
DB_CLUSTER_KUBECONTEXT  = gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0
ARTIFACT_REGISTRY = us-west3-docker.pkg.dev/plenary-truck-485623-p7/knoe-system
SERVICE_NAMESPACE = knoe-system
REGISTRY_NAMESPACE = knoe-system
```

**Why these matter:** `Milestone._get_script_env()` (in `knoe/milestone.py`) reads these to set `KUBECONTEXT=app_ctx` for common services and `DB_CLUSTER_KUBECONTEXT=db_ctx` for CNPG ops. Without them, all kubectl calls use the ambient context, which may be the DB cluster.

Missing `init_cluster.app_cluster_kubecontext` → `_cluster_kubecontext("app")` returns `""` → installer falls back to `Global.KUBECONTEXT` for **both** app and db environments → **Garage deploys to knoe-cnpg-0** (wrong).

### Get current CNPG node names

```bash
kubectl --context=gke_plenary-truck-485623-p7_us-west3_knoe-cnpg-0 get nodes -o name
```

---

## Key scripts

| Script | Purpose |
|---|---|
| `scripts/reset_clusters.sh` | Delete + recreate both GKE clusters (e2-small × 3 each) |
| `scripts/patch_garage_cross_cluster.sh` | Remove garage from DB cluster, configure GCS barman ObjectStore |
| `etc/init_cnpg_gke.sh` | Provision CNPG on GKE with GCS backup via Workload Identity |
| `etc/init_cnpg_backup.sh` | Configure barman plugin + trigger initial backup |

---

## Cluster code constants (`knoe/core/actions.py`)

```python
DEFAULT_APP_CLUSTER_NAME    = "knoe-dev-0"
DEFAULT_DB_CLUSTER_NAME     = "knoe-cnpg-0"     # also: DEFAULT_CNPG_CLUSTER_NAME
DEFAULT_APP_CLUSTER_MACHINE_TYPE = "e2-small"
DEFAULT_DB_CLUSTER_MACHINE_TYPE  = "e2-small"
```

---

## GCP project

- Project: `plenary-truck-485623-p7`
- Region: `us-west3`
- Artifact Registry: `us-west3-docker.pkg.dev/plenary-truck-485623-p7/knoe-system`
- CPU quota: 16 vCPUs (all regions) — 2 clusters × 3 × e2-small = 12 vCPUs used